Agriculture Sprayer Drone Battery Care Specifications

Good battery maintenance habits can not only reduce accidents, but also prolong its service life.

Keep the battery clean and avoid corrosion

After each operation, wipe the battery surface and plug with a dry cloth to ensure that there are no pesticides and mud stains left, so as not to corrode and cover the battery plug, resulting in short circuit or poor contact of the battery.

Handle with care to avoid battery damage

Dropping or impacting the battery may cause deformation damage or short-circuit spontaneous combustion. Therefore, when using the battery, you must handle it with care, and do not lift the power cord of the battery to avoid damage to the battery caused by falling and impact. After the battery is removed, it should be placed neatly, and should not be stacked or placed obliquely, so as to prevent the battery socket from rubbing against dirt or stones, resulting in poor contact.

Charge in the shade and keep it ventilated

During battery charging and storage, avoid direct sunlight and try to be in a cool environment as much as possible. When using a water tank for water-cooled charging, it is forbidden to use turbid, acid and other liquids to soak the battery, and it is forbidden to use containers (buckets, basins, etc.) other than the Jifei Technology water cooling box.

Do not over discharge the battery

Battery overdischarge is also a common cause of high battery temperature. If the battery is over-discharged, the battery will be damaged and the service life will be shortened. Aircraft modification and overloading can also lead to over-discharge of batteries.

Regular inspection, do not disassemble the battery at will

Regularly check the battery body, handle, wire, and power plug to see if the appearance is damaged, deformed, corroded, discolored, broken, and whether the plug is too loosely connected to the aircraft. In addition, non-professionals should not disassemble or install the battery at will, because improper operation can easily damage the circuit board, which may cause a fire.