Special Reminder About Using Agricultural Spray Drones to Mark Obstacles

In particular, pay attention to the plots that have been mapped in previous years, and whether the information has changed, such as whether the marked trees have grown up, or the obstacles are different.

When surveying and mapping, pay attention to the branches on the side of the plot, and survey and map the outermost 1 meter of the branches. Some fruit trees may have a higher and wider crown after one year's growth, and they need to be marked again.

When surveying and mapping the wire, the lowest point of the entire horizontal cable should be measured, and the flight should be carried out at a height lower than the lowest point of the wire.

If there are many wires and staggered, you can use functions such as block cutting to further reduce the occurrence of frying.

Generally, the surveying and mapping should surround the entire obstacle, and the utility pole and the cable stay should be surveyed and mapped as one obstacle. Do not fly through the middle of the cable and the pole.